3 Ton Extra Tall Ratcheting Jack Stands, 13.39–21.06 in Pair

3 Ton Extra Tall Ratcheting Jack Stands, 13.39–21.06 in Pair

$19.99
Sale price  $19.99 Regular price  $29.99
Skip to product information
3 Ton Extra Tall Ratcheting Jack Stands, 13.39–21.06 in Pair

3 Ton Extra Tall Ratcheting Jack Stands, 13.39–21.06 in Pair

$19.99
Sale price  $19.99 Regular price  $29.99
In stock, ready to ship
Visa Mastercard American Express Google Pay Apple Pay

Lift Points, Not Guesswork

This pair uses an alloy steel welded-frame body with a cast iron ratchet bar for manual height setting under static load. Adjustment spans 13.39 to 21.06 inches (340 to 535 mm) for taller chassis and higher lift points on SUVs, MPVs, and UTV/ATV applications. The pyramid base has a 7.2 × 8.86 in footprint to spread ground contact on shop floors and drive surfaces. The saddle contact area is shaped for common pinch welds and frame lift locations.

3 Ton Extra Tall Ratcheting Jack Stands, 13.39–21.06 in Pair

Ratchet Bar Operation in Plain Terms

Height is set through a self-locking ratcheting column with a sawtooth profile that indexes in stepped positions as the post is raised. After setting the stand, place it under a manufacturer-specified lift location once the vehicle is raised with a floor jack, then lower the load onto the saddle. The set is rated at 3 tons (6,000 lb) for static vehicle support during maintenance that requires underbody access. Components are used with typical floor jacks and standard garage service sequences.

3 Ton Extra Tall Ratcheting Jack Stands, 13.39–21.06 in Pair

Setup That Matches Garage Routine

Place each base flat on a level surface, then raise the ratchet column to match the intended lift location before lowering the vehicle onto the saddle. When supporting the same axle, set both stands to the same tooth position to match height. Store the pair in a garage cabinet, shelf, or trunk cargo area based on available space. Remove debris from the ratchet teeth and saddle using a dry brush or shop towel.

Product Benefits:

  • Vehicle lift-point fit: Saddle shape matches common pinch welds and frame lift locations.
    Manual height setting: Sawtooth ratchet column sets height in stepped positions with a locking pawl.
    Height range for taller chassis: 13.39–21.06 in (340–535 mm) supports higher lift points on SUVs, MPVs, and UTV/ATV use cases.
    Base contact footprint: 7.2 × 8.86 in pyramid base spreads contact area on garage floors and driveway surfaces.
    Two-stand axle support: Set both stands to the same ratchet tooth when supporting the same axle.

Specification:

  • Material: Alloy steel welded-frame body; cast iron ratchet bar
  • Dimensions: 8.86 × 7.2 × 13.39 in
  • Weight: 17 lb per pair
  • Operating Range or Capacity: Height 13.39–21.06 in; load capacity 3 tons per set
  • Connection Type: Saddle contact interface; ratcheting post mechanism
  • Placement or Use Area: Garage floor or driveway surface; under-vehicle lift locations
Can My Order Be Returned?

Not every order automatically qualifies for a return. To be considered, a request must be submitted within 30 days after the delivery date shown by the shipping carrier.

For more information, click here.

Free Shipping
  • Destination: United States
  • Shipping Cost: Free Standard Shipping
  • Order Processing: 1–2 Business Days (Monday–Friday)
  • Estimated Transit: 4–7 Business Days (Monday–Friday)

For more information, click here.

  • 5 stars: 15 (79%)
  • 4 stars: 4 (21%)
  • 3 stars: 0 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
w
wildfire

I was worried about stability at the taller heights since some stands get wobbly the higher you go. These don't have that problem at all. The base is wide enough that even extended to the max they feel planted. Three tons of rated capacity and they hold it no issue.

C
Carrie

the saddle on top is a decent size and the contact point feels secure on the pinch weld. some cheaper stands have a tiny little cup that makes you nervous. this one grips properly and sits flat.

A
Abigail White

told my buddy to grab a pair of these after he was complaining about his short stands not giving him enough room to work under his lifted 4x4. he got them, said the extra height makes a huge difference and the ratchet mechanism feels solid. glad i could help him out

R
Ralph C.

Great pair of stands.

t
tommy-paul467

These sit at a solid 21 inches at the top end, which is exactly what I needed for my full-size pickup. I use them regularly and honestly they just work. Stable on concrete, easy to adjust, no drama.

c
cozygrape84

love these

m
margaret_984

SOLID STANDS!!

k
kenneth.thornton3534

My old stands were the old pin-style and the pins would slip if I wasn't perfectly lined up. These ratcheting ones lock at every notch so there's no single failure point. I've had them under my truck for extended periods and they haven't budged once.

F
Fred Parker

really happy with these, use them all the time in the garage

E
Eugene

Perfect.

S
Scott

The range on these is genuinely useful. Going from 13 to just over 21 inches covers a lot of vehicles without swapping stands. I used them on my sedan and then on my brother's truck the same weekend, no problem either time.

C
COLIN

Very pleased with this purchase. The height range is useful and the ratchet locks in securely. I feel confident working under my vehicle with these supporting it.

R
Rita Mueller

Does exactly what it should. Feels very well built for the price.

P
PAULA

They work great and feel sturdy. No complaints at all since I got them.

d
debbie_mom

What I noticed right away is how smooth the ratchet mechanism clicks up. You can fine-tune the height really precisely instead of being stuck between two positions like pin stands. That alone makes them worth it when you need a specific height to clear the frame.

j
julie121

SOLID 👍!!

s
scott.dixon1658

these are just good stands, simple as that. easy to adjust, feel stable, and the capacity is plenty for what I do

J
Jared Sutton

Three tons per stand is reassuring when you're working under something heavy. I checked the welds when I got them and they looked clean and solid, no rough spots or gaps. The locking pawl clicks into the rack firmly and shows no sign of backing off under load.

r
ralph-hawkins1657

Bought these to replace a cheaper set I had before. The build quality is noticeably better and the extra height clearance has made a real difference when working on my truck. Would recommend to anyone doing their own work at home.